Metal-Industry Flat Products
Hot rolled steel coil and sheet
Either side trimmed or untrimmed, slitted od unslitted, pickeld and unpickeld, oiled, not oiled, in form of coils or sheets.
Carbon steel
| Thickness: | 1.50 - 20.00 mm |
| Width: | 1500 mm |
| Length: | 3000 - 12000 mm |
Structural steels are mainly used in the building industry and mechanical construction. Applications include building components, containers, storage tanks and roll formed profiles.
| STRUCTURAL STEEL |
DIN EN 10025-94
TS 2162 EN 10025-96 |
DIN EN 10025-91 |
DIN 17100-80 |
S235JRG2 |
Fe 360 B |
RSt 37-2 |
S235J2G3 |
Fe 360 D1 |
St 37-3 |
S275JR |
Fe 430 B |
St 44-2 |
S275J2G3 |
Fe 430 D1 |
St 44-3 |
E295 |
Fe 490-2 |
St 50-2 |
S355J2G3 |
Fe 510 D1 |
St 52-3 |
E335 |
Fe 590-2 |
St 60-2 |
E360 |
Fe 690-2 |
St 70-2 |
| LOW STRENGTH |
DIN EN 10111 |
DD 11 |
|
DIN EN 10111 |
DD 12 |
|
| MEDIUM STRENGTH |
S235JRG2C |
DIN EN 10 025 |
|
S275J2G3 |
DIN EN 10 025 |
|
S275JRC |
DIN EN 10 025 |
|
| BANDABLE QUALITY |
S235J2G3C |
Fe 360 D1 KQ |
QSt 37-3 N |
S275J2G3C |
Fe 430 D1 KQ |
QSt 44-3 N |
S355J2G3C |
Fe 510 D1 KQ |
QSt 52-3 N |
S235JR |
DIN 17100 : 1980 |
St 37-2,RSt 37-2 |
S235J0 |
DIN 17100 : 1980 |
St 37-3 |
S235J2G4 |
DIN 17100 : 1980 |
St 37-3 |
S275J0 |
DIN 17100 : 1980 |
St 44-3 |
S275J2G4 |
DIN 17100 : 1980 |
St 44-3 |
S355JR |
DIN 17100 : 1980 |
St 52-3 |
S355J0 |
DIN 17100 : 1980 |
St 52-3 |
S355J2G4 |
DIN 17100 : 1980 |
St 52-3 |
High strength low alloy steels
| Thickness: | 2.00 - 15.00 mm |
| Width: | 1000 mm - 2000 mm |
| Length: | 2000 - 6000 mm |
High Strength Low Alloy steels are used in a wide range of applications in transport (earth movers, trailers, agricultural or railroad machinery), profiling (racks) and building.
EN 10149-2:1995 |
SEW 092:1990 |
S315MC |
QstE340TM |
S355MC |
QstE380TM |
|
QstE420TM |
S420MC |
QstE460TM |
S460MC |
QstE500TM |
S500MC |
QstE550TM |
S550MC |
QstE600TM |
High carbon steels
| Thickness: | 3.00 - 150.00 mm |
| Width: | 1000 mm - 2500 mm |
| Length: | 2000 - 12000 mm |
They are used for the manufacturing of mechanical parts, such as clutches, springs, segments, saws, measuring tape etc.
EN 10083-1:1997 |
EN 10132-4:2000 |
DIN 17200 |
C40E |
|
Ck40 |
C45E |
|
Ck45 |
C50E |
|
Ck50 |
C60E |
|
Ck60 |
C67S |
C67S |
Ck67 |
C75S |
C75S |
Ck75 |
C100S |
C100S |
Ck101 |
